GP-12e PHYSIOAMP

$985.00

MONITORS 12 CHANNELS - Four input channels are microvolt level with selectable gain and bandwidth for EMG, EEG and ECG. Four channels are temperature, respiration, or other high level sensors. Four channels are for GSR SR/SC. One channel is for PPG optical sensors to measure HR and BVP.

SOFTWARE - General purpose signal monitoring and recording applications are included. The 2023 updated software is supported on Windows 10 and 11. Third party software is available from several suppliers. We provide drivers and support for software developers. GP-12 is compatible with software developed for older I-330-C2+ devices.

NO BATTERIES - Power is supplied from USB by an isolation module. This reduces down-time and service problems. This radio frequency isolated power and data is superior to optical.

RELIABLE CABLES- Medical standard 1.5mm pin to snap leads are used for electrode connections and are available from many suppliers. 

NEW TECHNOLOGY - It gives you cleaner signals, more reliability, and lower cost in a compact, rugged enclosure. New advanced chips provide 16 bit signal resolution.

COMPACT DESIGN - A general purpose physiological signal monitor in a case the size of 2 packs of playing cards. Add a small computer and you have a system in your pocket.

CONNECTION TEST - A built-in test monitors electrode connections and shows ohm values.

ADAPTABLE - A digital input connects optional accelerometer or compass modules for virtual reality applications. This input is also used for event markers from other equipment.

MONITORS 12 CHANNELS - Four input channels are microvolt level with selectable gain and bandwidth for EMG, EEG and ECG. Four channels are temperature, respiration, or other high level sensors. Four channels are for GSR SR/SC. One channel is for PPG optical sensors to measure HR and BVP.

SOFTWARE - General purpose signal monitoring and recording applications are included. The 2023 updated software is supported on Windows 10 and 11. Third party software is available from several suppliers. We provide drivers and support for software developers. GP-12 is compatible with software developed for older I-330-C2+ devices.

NO BATTERIES - Power is supplied from USB by an isolation module. This reduces down-time and service problems. This radio frequency isolated power and data is superior to optical.

RELIABLE CABLES- Medical standard 1.5mm pin to snap leads are used for electrode connections and are available from many suppliers. 

NEW TECHNOLOGY - It gives you cleaner signals, more reliability, and lower cost in a compact, rugged enclosure. New advanced chips provide 16 bit signal resolution.

COMPACT DESIGN - A general purpose physiological signal monitor in a case the size of 2 packs of playing cards. Add a small computer and you have a system in your pocket.

CONNECTION TEST - A built-in test monitors electrode connections and shows ohm values.

ADAPTABLE - A digital input connects optional accelerometer or compass modules for virtual reality applications. This input is also used for event markers from other equipment.

Powered from USB. Isolation 5000volt.

ADC resolution 16 bits.

Sample rates can be 128, 256, 512 and 1024s/s.

4 BP inputs for EEG, EMG or ECG signals.

Gain can change input range to +-500 or +-2500 microvolts.

Analog high pass filters can be 0.6Hz or 3.5Hz.

Analog low pass filter can be 60Hz or 400Hz.

Gain and filters can be chosen independently for each amplifier.

Negative (reference) inputs for BP channels can be

connected to each other internally.

Impedance tests can be done for each input.

Each of 4 RV inputs have 1.6 uA constant current for skin resistance

and independent inputs for temperature or respiration sensors.

PPG sensor 1 input. Accelerometer sensor 1 input.